How much does Screw Conveyor cost?

Monday October-13 2025  17:58:39

Screw Conveyor Cost  vary depending on their appearance, material, size, functionality, and conveying capacity, with typical prices ranging from $70 to $8,000.vertical types are more expensive, while U-shaped devices are less expensive. The following details screw conveyor prices.

There are many different types of screw conveyors, including U-shaped screw conveyors ranging from approximately $100 to $2,000, inclined screw conveyors from approximately $200 to $3,000, tubular screw conveyors from approximately $180 to $3,200, and vertical screw conveyors from approximately $180 to $7,000. These screw conveyors are suitable for conveying materials of various physical properties, such as powders, granules, small pieces, and sticky or tangled materials.

Screw Conveyor Product Display

What are the prices of different types of screw conveyors?

Different types of screw conveyors have different prices. U-shaped ones with or without a shaft have different prices, as do tubular ones made of carbon steel and stainless steel. There are also mobile types with pulleys, vertical types, and inclined types. Below is the price range for each type.
U-shaped screw conveyors: named for their open U-shaped trough, are usually used for horizontal or small-angle material transportation, which is easy to clean and maintain. Common types include shafted, shaftless and dual-shaft.

The spiral blades of shafted U-shaped screw conveyors are fixed on a central shaft. Depending on the model and working conditions, the output of shafted screw conveyors can range from a few tons to hundreds of tons per hour. Its price is about $100 to $2,000.

The shaftless U-shaped screw conveyor has no central shaft and relies only on a flexible spiral body to rotate and push the material in the U-shaped groove. The material is not easy to clog and is easy to clean. The price of shaftless U-shaped screw conveyors is generally higher than that of shafted types due to their special spiral structure and higher manufacturing cost. Its price is about $300 to $2,000.

The dual-shaft screw conveyor has two spiral shafts rotating in opposite or same directions. The dual-shaft design can increase the conveying capacity and play a certain role in crushing and stirring the material to prevent clogging and bridging. The dual-shaft U-shaped screw conveyor is a relatively expensive type of U-shaped screw conveyor due to its complex structure and higher drive requirements. Its price is usually between $800 and $2,000.

Inclined screw conveyors: usually used to lift materials from a lower position to a higher position, or to convey them in an inclined direction. The inclination angle is generally between 0° and 45°, and the materials are generally carbon steel and stainless steel. In addition, there are mobile designs.

The conveying distance of carbon steel inclined screw conveyors is usually between a few meters and tens of meters. For short-distance lifting or conveying (such as within 10 meters), inclined screw conveyors are a common choice. Carbon steel materials can meet the use requirements in general industrial environments. The price of inclined carbon steel screw conveyors depends on the inclination angle, conveying height, conveying capacity, screw diameter and length. Its price is about $250 to $1,800.

The conveying capacity of stainless steel inclined screw conveyors is usually from a few tons/hour to tens of tons/hour, and can even reach hundreds of tons/hour, depending on equipment specifications, material characteristics and operating parameters. The price of stainless steel inclined screw conveyors is significantly higher than that of carbon steel types due to the high cost of stainless steel materials and increased processing difficulty. The price is between $500 and $3,000.

The mobile inclined screw conveyor is equipped with a mobile base and wheels at the bottom, which can be easily moved between different locations for flexible loading, unloading and transportation of bulk materials. The mobile inclined screw conveyor adds a mobile mechanism (such as wheels, lifting mechanism, etc.) on the basis of the inclined conveyor, so the price will be higher than the fixed type. Its price range is between $300 and $3,000.

Tubular screw conveyor:

The tubular screw conveyor uses a closed circular tube as the casing, and the spiral blades rotate in the tube. According to the conveying direction, it is divided into horizontal conveying and inclined conveying.

The horizontal tubular screw conveyor is mainly used for conveying powdery and granular materials in the horizontal direction, especially for occasions that require closed conveying, prevent dust spillage, and avoid moisture or contamination of materials. The price of the horizontal tubular screw conveyor is usually between $180 and $2,800.

The inclined tubular screw conveyor is similar to the inclined U-shaped screw conveyor, but due to its closed tubular structure, it is more suitable for materials that need to be closed and lifted, prevent dust pollution, or convey materials with a certain fluidity but may be damp. The price of an inclined tubular screw conveyor is slightly higher than that of a horizontal tubular type because it needs to deal with the gravity effect and driving force required when the material is conveyed at an angle. Its price range is about $560 to $3,200.

Vertical screw conveyors are mainly used to lift materials from low to high places vertically. They occupy a small area, but have certain requirements for the fluidity and viscosity of the materials. They are suitable for occasions where materials need to be transported vertically to high silos, production lines or packaging equipment. For example, lifting cement from the ground to the top of the silo, or lifting grain to the processing line. The price of a vertical screw conveyor is closely related to the lifting height. The higher the lifting height, the higher the required screw shaft strength, driving power and structural stability requirements, so the price rises in a step-by-step manner, ranging from about $180 to $7,000.

Basic Parameters of Screw Conveyor

What are the benefits of screw conveyor?

The main components of a screw conveyor include spiral blades, shafts, tube troughs, and drive devices. Its structure is simple, and its manufacturing and maintenance costs are relatively low. It can be installed horizontally, tilted, or even vertically to adapt to narrow or complex spatial layouts. By using multiple sections in series or special universal joints, it can bypass obstacles and achieve multi-directional conveying. Loading and unloading ports can be opened at multiple locations on the tube trough and controlled by gates, achieving one-point feeding and multiple-point discharging, or multiple-point feeding and one-point discharging. The conveying speed is stable, and the conveying volume can be precisely controlled by adjusting the speed. It is easy to achieve linkage and automated control with the batching system and packaging machine.

How to choose a screw conveyor manufacturer for a quote?

Our manufacturer provides customized production services and can adjust product design and manufacturing according to the specific needs of customers. This includes personalized customization of product specifications, functions, materials, etc. Our manufacturer also has the ability to handle multiple production types and can flexibly adjust according to customer production needs. Whether it is a small batch order or a large batch production, the manufacturer can provide corresponding production solutions to meet the production requirements of different scales. In addition, the manufacturer has established a quick response mechanism to respond to customer inquiries, questions or needs in a timely manner. This helps to maintain communication efficiency and ensure the smooth progress of the production process. And provide comprehensive after-sales service, including technical support, maintenance, troubleshooting, etc. after product delivery. This helps to ensure the normal operation of the product throughout its life cycle.

How much does a screw conveyor cost? Solution

Screw Conveyor Cost: In the chemical industry, if corrosive materials such as fertilizers and plastic pellets are being transported, a screw conveyor made of corrosion-resistant materials is required, costing between $2,000 and $7,000 per set. The building materials industry, which handles large material volumes and experiences severe wear, requires equipment with thicker troughs and highly wear-resistant spiral blades, such as for conveying cement and lime powder. These cost approximately $1,500 to $4,500 per set. The food industry, which has strict hygiene requirements, requires food-grade screw conveyors, costing approximately $20 to $35 per meter.

Screw Conveyor cost  is affected by many factors, mainly including material (such as carbon steel, stainless steel), diameter and length (determine the conveying volume and conveying distance), motor power, corrosion and explosion-proof requirements, and whether it is customized. In addition, there are many types of screw conveyors, such as shaft screw conveyors, shaftless screw conveyors, double-shaft screw conveyors, carbon steel inclined screw conveyors, stainless steel inclined screw conveyors, horizontal tubular screw conveyors, inclined tubular screw conveyors, mobile tubular screw conveyors and vertical screw conveyors. The prices of different types are different, and the specific prices need to be inquired according to the detailed technical parameters.